5 Safety Tips to Consider When You Are Operating Your Centrifuge
Centrifuge machines are important pieces of electronic equipment, which are primarily used for separating different components within a particular sample mixture, for instance, separating a mixture of the suspended solids or two immiscible liquids. When you are operating your centrifuge machine, it is crucial that you maintain certain safety tips, so that your machine lasts for a really long time. Given below is a list of the safety tips, which when considered will ensure that no damage is caused to the centrifuge machine and you will also be protected from any kind of serious injury.
Ensure that the surface of work is firm as well as level
You need to ensure that the work surface remains level and firm. You should not make use of your centrifuge machine when placed on a slanted or uneven work surface.
Balance your tubes present in the rotor
If you are interested in running your tube with 10 ml of any liquid, you have to put another tube, which contains 10 ml of water, in the other hole, present in the rotor. If the liquid is responsible for having a high or low density in comparison to water, you should balance your tubes by mass and not by volume. You need to ensure that the mass of every tube is as close to each other as possible. This becomes crucial when the rotor speed is high. If you are running the centrifuge machine with an unbalanced load, your machine can be damaged permanently. It can also be responsible for causing injury to the person operating the machine.
Ensure that you are not opening the lid when the rotor is moving
It is true that a number of centrifuge machines are known to have the safety shut off lids. In case if you open the lid, this safety technology helps in stopping the supply of power to the rotor. The rotor is going to spin as a result of the inertia for at least a little while, until and unless the friction slows and stops the rotor.
If you see that your rotor is shaking or wobbling, you need to pull the connection
Little vibration is considered to be normal but if you see that the machine is vibrating excessively, it can be dangerous. The first thing that you have to do is understand whether the tubes have been balanced correctly. If they have been balanced properly but still the machine is wobbling, you need to contact your dealer or manufacturer for getting the unit checked. You should not keep running the centrifugal machine, which is responsible for wobbling especially when you see that the rotor is spinning.
Ensure that you are wearing safety goggles
Make sure that you have your face shield or your safety goggles with you when you are working near your centrifuge machine. You never know when an accident is going to happen. You need to know that the rotor spins rapidly and is responsible for generating extreme force.
Conclusion
Your safety is in your hands. Therefore, it is your responsibility to ensure that you are taking care of the safety tips when you are using your centrifuge machine. Consider the tips that have been mentioned above in order to remain safe.